Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Chesapeake?
Spring repair in Chesapeake typically costs $180 – $340 for one spring. A matched pair is usually replaced together, so a pair runs about twice that range. Every price you see here is a typical estimate, not a flat rate; the written estimate we give you sets the final cost.
The number moves with the spring type, how the door is built, and how far out of balance it has drifted. Torsion springs (the wound ones on a bar above the door) sit at the higher end. Extension springs (the stretched ones along the sides) sit lower. Spring replacement is one of the most common repairs we handle on Chesapeake doors, and our technicians have up to 15 years of experience with the brands most homeowners actually own: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Key Takeaways
- One spring: $180 – $340. A matched pair is about twice that.
- Torsion springs cost more than extension springs.
- Springs are under extreme tension and are not a safe DIY job.
- The written estimate sets the final price. The estimate itself is free.
Spring Replacement Cost Breakdown (2026)
Here’s how the work breaks down into line items for a typical spring job in Chesapeake. These are estimated ranges for the Chesapeake market.
| Line Item | Typical Estimated Range |
|---|---|
| One spring, replaced | $180 – $340 |
| Matched pair of springs (replaced together) | About twice the single-spring range |
| Spring repair (repair rather than full replacement) | $180 – $340 |
| Cable repair (cables often need attention at the same time) | $130 – $250 |
| Track realignment (if the door has shifted) | $120 – $240 |
| Roller replacement (worn rollers add drag on the springs) | $110 – $220 |
| General garage door repair, if more than springs is wrong | $150 – $600 |
What pushes the estimate to the top of its range: torsion springs instead of extension springs, a pair that both need replacing, cables that have frayed, or a door that’s been dragging on worn rollers and threw the springs out of balance. What keeps it near the bottom: a single extension spring replacement with no other worn parts. We don’t quote a single range for both one spring and a pair, because a pair is genuinely about double the work and the parts cost.
What Affects Spring Replacement Pricing in Chesapeake
Chesapeake homes are a mix of older neighborhoods and newer construction, and the door you have shapes the price. A few factors account for most of the difference:
- Spring type. Torsion springs run at the higher end of the range. Extension springs run lower. Which one you have depends on the door and the builder who installed it.
- One spring or a pair. When one spring of a matched pair breaks, the other has usually lived the same life and is close behind. Replacing just the broken one now can mean paying for the job twice. A pair costs about twice the single-spring range.
- Door weight and size. A heavier or larger door needs springs rated for more load, and those sit toward the top of the range.
- Related wear. Cables, rollers, and tracks take the same wear as the springs. If they’re frayed or dragging, they add to the job. Cables are the most common add-on.
- Age of the door hardware. On an older door, brackets, drums, and bearing plates may be worn enough that the technician factors them into the estimate so the new springs seat and run correctly.
- Whether a permit or inspection applies. Most cities don’t require a permit for a spring swap, but requirements vary by locality, so it’s always worth asking the city’s building department if you have any doubt.
None of this changes the core answer: a single spring sits at $180 – $340, and a pair is about twice that. Everything above determines where in that range your job lands.
Why Springs Fail, and Why It Matters for Cost
Springs are a wear item. They carry the full weight of the door and cycle up and down countless times over their life, and eventually they fatigue and snap. In a climate like Chesapeake’s, the seasonal swing between humid summers and colder winters puts repeated stress on the metal, and doors that run daily reach the end of a spring’s life faster than doors that are used lightly.
When a spring breaks, the door usually becomes too heavy to lift safely by hand, and the opener may strain or stall. Don’t keep running the opener against a broken spring; that loads the motor and the door in a way it wasn’t built for. A repair now protects the opener and the panels from further damage. If you’re hearing a loud bang from the garage or the door won’t come up level, that’s a call for a specialist, not a handyman. Highpoint does garage doors exclusively, so the technician who arrives works on springs and openers every day. You can read more about how we handle it at Highpoint Garage Door Service.
Springs Are Not a DIY Job
We say this plainly because it’s the most important safety point on this page: torsion springs are wound under extreme tension, and a spring or cable that lets go can cause serious injury. Extension springs can too. There’s no safe way to wind, unwind, or swap a spring without the right tools and training, and it’s not something to attempt from a ladder in the driveway. A trained professional handles it with the door secured and the tension controlled. What you can do is know the warning signs and leave the actual work to someone equipped for it. We’re glad to take the risk off your hands.
How to Save on Spring Replacement
The biggest savings come from doing the job once and doing it right. A few practical ways to keep the cost where it belongs:
- Replace the pair, not just the broken one. It sounds like more up front, but replacing both springs of a matched set in one visit usually costs less over time than two separate calls when the second spring fails.
- Fix related wear at the same time. If cables or rollers are already worn, handling them in the same visit avoids a second estimate and a second appointment.
- Get it looked at early. A door that’s sluggish or off-balance is cheaper to correct before a spring snaps and takes a cable or a panel with it.
- Ask for the written estimate up front. The written estimate sets the final price, so you know what you’re paying before anything is touched. The estimate is free.
To get a free estimate, call (877) 309-4107. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Chesapeake?
Spring replacement in Chesapeake typically costs $180 – $340 for one spring, and a matched pair runs about twice that range. Cable repair ($130 – $250) or track work ($120 – $240) can add to it if those parts also need attention. Call (877) 309-4107 for an exact quote; estimates are free.
Is it cheaper to replace a pair of springs or just the one that broke?
Replacing just the broken spring is cheaper in that one visit, but a pair is usually the better value. Both springs of a matched set have lived the same life, so the second one often fails soon after, and you pay for the job twice. A pair costs about twice the single-spring range, so plan on $360 – $680 for a pair. Call (877) 309-4107 and we’ll walk you through it.
Do torsion springs cost more than extension springs?
Yes. Torsion springs sit toward the top of the $180 – $340 range, and extension springs sit toward the bottom. Which one you have depends on your door and how it was built. Call (877) 309-4107 for a free estimate on your specific door.
Can you come the same day for a broken spring?
Same-day service is often available for a broken spring. Call (877) 309-4107. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. A call outside those hours is booked into the next opening.
Will I get a price before the work starts?
Yes. The written estimate sets the final price, so you know the cost before anything is replaced. The estimate itself is free. Call (877) 309-4107 to schedule one.
Pricing reflects the Chesapeake market as of 2026. Highpoint Garage Door Service offers free estimates – call (877) 309-4107.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Dustin Rhodes"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Brooke Hayes"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Craig Gallagher